- Home
- L-Series Rocker Switch
- Upper Independent
- Lighting
- L-SERIES, DOME LIGHT, UPPER LED INDEPENDENT
L-SERIES, DOME LIGHT, UPPER LED INDEPENDENT
- SPST ON/OFF switch.
- UPPER LED is independently wired. If connected this will light up the symbol area
- LOWER LED is ON when the upper part of the rocker is ACTIVATED. This will light up the text area.
- Rated 20A 12VNo rear barriers between terminals. LC1 housing connectors can be used with Packard 630 terminals. LC1 connector and terminals are sold separately.
- Insulated 1/4" female quick disconnect terminals can also be used. This is a 4 terminal switch with a common ground for both LEDs
- Optional Dynatex Dielectric Grease Locks out moisture
- Optional Harness Adapter Click link for info
Custom text: Maximum 2 lines, and 7 letters/spaces per line
- Details
- Customers also bought
- Customer feedback
Seal Protection
- Locks out elements such as water, dust & debris. Certified to IP67 for front panel components.
Switch mounting
- Fits into industry standard mounting hole of 1.734 x .867 in [44.0mm x 22.0mm].
Panel Thickness Range
- Acceptable Panel Thickness
.030 to .156 (.76mm to 3.96mm)
- Recommended:
.030, .062, .093, .125 and .156
Switch Depth
- Switch only from base to terminal end - 1.75 inches
- Switch with LC1-01 attached - 2.38 inches
Switch dimension
- Base with rocker installed - 1.97 X 1.02 inches
-
![Female Quick Disconnect 18 to 22 gauge]( "Female Quick Disconnect 18 to 22 gauge")
Female Quick Disconnect 18 to 22 gauge$1.00 -
![SEALINK RECEPTACLE]( "SEALINK RECEPTACLE")
SEALINK RECEPTACLE$10.50 -
![Actuator/Rocker Removal Tool]( "Actuator/Rocker Removal Tool")
Actuator/Rocker Removal Tool$4.00 -
![Bussmann MINI Fuseholder-HHL]( "Bussmann MINI Fuseholder-HHL")
Bussmann MINI Fuseholder-HHL$3.25 -
![Bussmann MINI Fuseholder-HHM]( "Bussmann MINI Fuseholder-HHM")
Bussmann MINI Fuseholder-HHM$3.25 -
![Blue Sea ST Blade Fuse Block With Cover]( "Blue Sea ST Blade Fuse Block With Cover")
Blue Sea ST Blade Fuse Block With Cover$31.95 -
![L-SERIES, A-PILLAR LIGHTS, UPPER LED INDEPENDENT]( "L-SERIES, A-PILLAR LIGHTS, UPPER LED INDEPENDENT")
L-SERIES, A-PILLAR LIGHTS, UPPER LED INDEPENDENT$20.00 -
![L-SERIES, BUMPER LIGHTS, UPPER LED INDEPENDENT]( "L-SERIES, BUMPER LIGHTS, UPPER LED INDEPENDENT")
L-SERIES, BUMPER LIGHTS, UPPER LED INDEPENDENT$20.00 -
![L-SERIES, WINCH IN/OUT, INDEPENDENT LEDs]( "L-SERIES, WINCH IN/OUT, INDEPENDENT LEDs")
L-SERIES, WINCH IN/OUT, INDEPENDENT LEDs$26.00
There have been no reviews
Only those who bought this product are allowed to add review
If you've already bought this product, please sign in and add your own review!
Categories
Reviews
I bought some L-Series switches for my Ranger to match the factory switches. These are great, looks just like factory and gives it a nice clean look. Would definitely recommend.
May 3, 2024
Manufacturers